Proulx Cutting Heads

Cutting Head 64R
CUtting Heads 64R Globemall

UN64 2 line Bump and Cut Head for RIGHT HAND rotating brush cutters/trimmers only

The UN64 is based on the very successful UN34 2 line bump and cut Head which was developed in the 1980’s.

The ‘SWIFT LOAD’ concept allows the operator to replace the nylon monofilament line without having to dismantle the head.

UN64Each end of the monofilament line is pushed through each the eyelet and secured to the spool.

UN64The Monofilament line is then wound onto the spool by rotating the head cover using a simple ratchet principle; this winds the line onto the spool without any ‘cross over’, and prevents ‘line weld’.

UN64This simple method makes line indexing more efficient.

UN64The UN64 is designed for the small to medium powered brush cutter and offering all the advantages of the proven bump feed mechanism from Proulx Mfg.

UN64The Swift Load system allows for easy indexing of the monofilament during use.

UN64Overhang on sides of head protects eyelet area, and gives the monofilament a sheltering area if user cuts too close to solid object.

UN64Moulded struts on top of the head re-enforces the housing and also helps to inhibit weed wrap.

UN64Easily replaceable eyelets.

Specifications:

- Head type Semi-automatic simple bump feed
- Cutting line Supplied with 6 metres of 2.0mm professional quality round line
- Head diameter 113mm
- Head weight 251gms
- Bolt type UA (Aluminium)
- Eyelets Aluminium

Packaging: Bulk delivery, clamshell with branded header cards, polythene bag with branded header card or cardboard box. Head is available with or without adapter bolt.

>> BACK to CUTTING HEADS

 

Home | About-Us | Products | Contact-Us | Cutting Heads
Cutting Lines | Swing Blades | Enquiries

© GlobeMall 2006